Features

• Dual AMD® Opteron™ 2000 Series (Socket F) Support, 1000 MHz HyperTransport Link
• nVidia MCP55 Pro and AMD8132 Chipsets
• Up to 32GB DDR2 667/533/400 SDRAM
• Dual-port Gigabit LAN/Ethernet Controller
• 8-port LSI 1068E SAS Controller
• 2 x8 PCI-e,
  1 x4 PCI-e (in x8 slot),
  1 64-bit 133MHz PCI-X,
  2 64-bit 133/100MHz PCI-X
• ATI ES1000 Graphics
• SIMLP IPMI 2.0 Support
• 8 Fan Support with Speed Control

Form Factor

• Extended ATX
• Dimensions: 12" x 13.05" (30.5cm x 33.2cm)

Processor/Chipset

• CPU
  - Dual 1207-pin Socket F
  - Supports up to two AMD Opteron™ 2000 Series (Socket F) processor(s)
  - Dual-core / Support
• System Bus
  - 1000MHz HyperTransport
• Chipset
  - nVidia MCP55 Pro
  - AMD 8132

System Memory

• Memory Capacity
  - Eight 240-pin DIMM sockets
  - Supports up to 32 GB DDR2 667 MHz memory
  - Supports up to 32 GB DDR2 533 MHz memory
  - Supports up to 32 GB DDR2 400 MHz memory
  - For Single CPU: Memory must be populated in CPU1 DIMMs only
  - For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
  - Dual channel memory bus
• Memory Type
  - DDR2 667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
• DIMM Sizes
  - 256 MB, 512 MB, 1GB, 2GB, 4GB
• Memory Voltage
  - 1.8V only

On-Board Devices

• SAS
  - LSI SAS1068E Controller
  - RAID 0, 1, 10 support
  - (Optional: AOC-IButton68) RAID 5 support
• SATA
  - nVidia MCP55 Pro SATA2 3.0Gbps Controller
  - 6 SATA2 Ports
  - nVidia RAID 2.0
  - SATA RAID 0, 1, 0+1, 5 JBOD Support
• IPMI
  - Support for Intelligent Platform Management Interface v.2.0
  - 200-pin IPMI slot (SIMLP)
  - (Optional: AOC-SIMLP-B(+))
  - (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
  - RMM (Remote Management Module)
  - (Card not included)
• Network Controllers
  - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
  - Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• VGA
  - ATI ES1000 Graphics Controller
• Super I/O
  - Winbond 83627HF

Input / Output

• SAS
  - Eight SAS / SATA (internal) ports
  - Up to 8 SAS / SATA hard drives supported
• SATA
  - 6 SATA2 ports
• IDE
  - Single EIDE channel support up to two UDMA IDE devices
  - Supports UDMA Mode 5
  - Supports PIO Mode 4
  - Supports ATA 100/133
• Floppy
  - 1 Floppy port; 1.44 MB support
• LAN
  - 2 RJ45 LAN ports
• USB
  - Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
  - 2 Rear Ports
  - 4 Internal Headers
• VGA
  - 1 VGA port
• Keyboard / Mouse
  - PS/2 keyboard and mouse ports
• Serial Ports
  - 1 Fast UART 16550 serial port
  - 1 serial port header

Supermicro Chassis ( Optimized for H8DM3-2 )

• 2U Chassis
  - CSE-825TQ-R700LPV*
  - CSE-825TQ-560LPV*
  * Please use air-shroud MCP-310-00030-01 (Air-shrouds sold separately)
• 3U Chassis
  - CSE-836TQ-R800V
  - CSE-836E2-R800
  - CSE-836E1-R800V
  - CSE-833T-R760
  - CSE-833T-550
  - CSE-933E2-R760
  - CSE-933E1-R760
  - CSE-933T-R760
• Tower / 4U Rackmount
  - CSE-745TQ-R800
  - CSE-745TQ-700
  - CSE-743TQ-R760
  - CSE-743T-R760
  - CSE-743T-650
• Important Chassis Notes
  * To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required]

Expansion Slots

• PCI-Express
  - 2 x8 PCI-e slots
  - 1 x4 PCI-e (in a x8 physical slot)
  - 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards with a power extension (i.e. CSE-RR2UE-AX)
• PCI-X
  - 1 64-bit 133MHz PCI-X (3.3V) slots
  - 2 64-bit 133/100MHz PCI-X (3.3V) slots
• IPMI
  - IPMI 2.0 expansion slot

System BIOS

• BIOS Type: 8Mb Flash EEPROM with AMI® BIOS
• BIOS Features:
  - Plug and Play (PnP)
  - DMI 2.3
  - PCI 2.2
  - ACPI 2.0
  - USB Keyboard Support
  - SMBIOS 2.3

Management

• Software
  - Optional IPMI (Intelligent Platform Management Interface) 2.0
  - Super Doctor III
  - Watch Dog
• Power Configurations
  - ACPI Power Management
  - Main Switch Override Mechanism
  - Wake-On-Ring (WOR) headert
  - Wake-On-LAN (WOL) header
  - Keyboard Wakeup from Soft-Off
  - Power-on mode control for AC power loss recovery
  - Internal/External modem remote ring-on

PC Health Monitoring

• CPU
  - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  - CPU 4-Phase-switching voltage reulator
• FAN
  - Total up to 8-fan status tachometer monitoring
  - Up to six 3-pin and two 4-pin fan headers
  - Status monitor for speed control
  - 3-pin fan support
  - Low noise fan speed control
  - Pulse Width Modulated (PWM) fan connectors
• Temperature
  - Monitoring for CPU and chassis environment
  - CPU Thermal Trip Support
  - I2C Temperature Sensing Logic
• LED
  - CPU / System Overheat LED
  - +5V Standby Alert LED

Other Features

• Chassis Intrusion Detection
• Chassis Intrusion Header
• Chipkill Support

Operating Environment / Compliance

• RoHS Compliant 5/6, Server Exemption
• Environmental Spec.
  - Operating Temperature: 10°to 35°C (50°to 95°F)
  - Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  - Operating Relative Humidity: 8% to 90% (non-condensing)
  - Non-operating Relative Humidity: 5 to 95% (non-condensing)

Regulatory

Passed to meet FCC standard requirement

Brand	Supermicro
Model No.	MBD-H8DM3-2-O
CPU	Opteron™ 2000 Series
Front Side Bus	2000 MT/S
Socket	1207 (F)
Chipset - Northbridge	NVIDIA MCP55 Pro
Chipset - Southbridge	AMD 8132
Memory	16 x DDR2 667/533/400MHz DIMM ECC
Max Memory Supported	32GB
Storage	3 x SAS/SATA + 6 x SATA 3Gb/s RAID
Storage2	2 x EIDE
Total Expansion Slots	6
PCI-X	3
PCI-E x1	1
PCI-E x8	2
LAN	10/100/1000Mbps
Integrated Graphic	ATI® ES1000
USB Type	USB2.0
Form Factor	Extended ATX
Dimensions	12" x 13.05"
Warranty	3-Year Manufacturer Warranty Manufacturer Product Page This item may require longer lead time, please call.

Manufacturer Part Number: H8DM3-2-O